|
 |
FSWERKS Tuner Edition Duratec Turbocharger
Kit
FSWERKS's
new Tuner Edition Turbocharger kit for the 2.0 and 2.3 litre Duratec Focus
delivers serious horsepower and torque potential. Factory appearance and fit
make this kit the perfect choice for the Do-It-Yourself Focus enthusiasts. If you have intermediate mechanical skills, knowledge, and the will to make your Focus more powerful then this is the perfect choice to achieve your goals AND save money! This kit offers the essentials and allows you to make choices on your air filter, injector, ECU flasher, programming, and diverter valve.
 Stage 1 Tuner Edition Turbo kit
What it DOES include:
● Garrett GT28R turbo with custom modifications
● Garrett GT28RS and GT2871R options and upgrades
● Internal wastegate
actuator
● Cast turbo manifold
● Stainless steel downpipe
with integrated flex and o2 sensor fittings
● Powder coated plumbing
with bead rolled ends
● Heat wrap for all critical components
● Custom MAF housing
What it DOES NOT include:
● 42lb. Bosch fuel injectors
● Bosch diverter valve
● ITG Maxogen air filter
● Water line kit
● 3 and 4 ply silicone
connecting hoses
● Stainless steel hose
clamps
● Stainless steel braided oil drain
 ● Instructions or instructional CD
● Tech support
● FSWERKS / SCT X3 ECU flasher WITH Stage 1 programming
● Free dyno tuning session
● Warranty*
Stage 2 Tuner Edition Intercooler kit
What it DOES include:
● Front mount intercooler
● Powdercoated plumbing
● 3 and 4 ply silicone hump hoses
● Stainless steel hose clamps
What it DOES NOT include:
● TurboSmart Manual boost controller
● Stage 2 ECU programming
● Warranty
*Warranty on the Garrett GT28R turbo is 1 year when a water line is used. If a water line kit is not used, the Garrett warranty will be voided.
|
Note: This kit is not CARB approved. Check your local laws for legality.
Ford Focus 2.0L Duratec Stage 1 (Non-Intercooled) |
FS090T |
$2,599.00
|
Ford Focus 2.3L Duratec Stage 1 (Non-Intercooled) |
FS093T |
$2,599.00
|
Autolite 103 Copper Spark Plugs - 1 step colder
(4 pack) - 2.0/2.3 Duratec
Recommended when you upgrade to Stage 1
( Gap to .035" ) |
AUTOLITE103 |
$12.00
|
Note: This kit is not CARB approved. Check your local laws for legality.
Ford
Focus Tuner Duratec Stage 2 (Intercooler Kit)
(Stage 1 Required) |
FS094T |
 $649.95
$799.95
|
Autolite 103 Copper Spark Plugs - 1 step colder (4 pack) - 2.0/2.3 Duratec
Required when you upgrade to Stage 2
( Gap to .035" )
|
AUTOLITE103 |
$12.00
|
Suggested/Replacement Accessories:
T25/T28 Turbo Discharge Flange
This is the same T25/T28 5 bolt flange that we use on our downpipes for our FSWERKS Duratec turbo kits. Made from 304L Stainless Steel with a pocketed design for those wanting to use an internal wastegate.
|
FS090-14 |
$54.95
|
FSWERKS Turbo Water Line Kit
Keep your turbo bearings cooler while reducing underhood temperatures. Increases turbo bearing life & reduces engine cool down time between aggressive driving. Highly recommended for any track use or hot weather climates. Install time is 2 hours.
For FSW Turbocharger Stage 1 or Stage 2 Kits
|
FS090-17 |
$89.95
|
Stainless Steel Braided Oil Drain Hose Upgrade Kit
Upgrade your original rubber oil drain hose with this S.S. braided
version. Can be mounted in it's original location or tapped directly into
the oil pan. Comes with all new hardware, gasket, & fittings. Recommended
for any racing or hot weather climates. S.S. braided hose will not require
replacement after every 8,000-10,000 miles like the factory rubber hose
which comes with the FSW Turbo kit.
Temperature Range -100F to 500F (-73C to 260C) Intermittent Service
Temperature Range -65F to 450F (-54C to 232C) Continuous Service
For FSW Turbocharger Stage 1 or Stage 2 Kits
|
FS090-16 |
$69.95
|
Aluminum Heat Shield Tubing
Heat protection for your plug wires, hoses, and more. Aluminum heat shield sleeves are made from a composite heat shield material with unlimited uses. This composite material provides abrasion resistance, thermal insulation, and physical containment of hoses and wiring. The material is a combination of aluminum, silica, and stainless steel, which provides a sleeving that is flexible, lightweight, and strong. Install these sleeves on wires or hoses by slitting the material, rather than disconnecting the wire or hose ends. These sleeves can withstand extreme temperatures of 750 degrees F.
Universal 3/4" Tubing (Sold by the foot)
|
FS090-750 |
$3.95 Ft
|
Aluminum Heat Shield Tubing
Universal 1 " Tubing (Sold by the foot)
|
FS090-100 |
$3.95 Ft
|
|
