Billet/Polyurethane Engine Mounts
The Ford Focus factory engine mounts were designed as soft, flexible units, to provide a comfortable drive. The drawback was the relatively large amount of engine movement the OEM mounts allowed under torque load and on hard acceleration. Such engine movement decreases stability under high performance driving conditions and rapid gear selection.
To reduce this movement VF-Engineering engineered a complete bespoke replacement fitted with specially shaped molded, high durometer polyurethane inserts. The mount body is machined from billet aircraft grade aluminum, being almost twice as strong
than the OE cast material. Installation should take no more than 10-15 minutes. This high performance mount provides a difference in the stability of the car when accelerating and braking hard. Gear changing under hard acceleration is also enhanced.
NOTE: For street use, we recommend using only the rear engine mount. Using all mounts together will cause some vibration (due to the nature of performance polyurethane mounts) that may not be desired for a daily driver, and is more for track use (Road racing, drag racing, autocross, etc).
Rear Engine Mount - 8v SPI, 16v Zetec, SVT, 2.0L & 2.3L Duratec |
FS045 |
 $99.95
$119.95
 |
Driver Side Engine Mount - 16v Zetec, SVT, 2.0L & 2.3L Duratec |
FS048 |
$145.95
$149.95
|
Passenger Side Engine Mount - 16v Zetec ONLY |
FS046 |
$145.95
$149.95
|
Passenger Side Engine Mount - SVT ONLY |
FS047 |
$145.95
$149.95
|
Passenger Side Engine Mount w/Steel Bracket - Duratec 2.0L/2.3L ONLY (2003-2007) |
FS049 |
$199.95
|
Checkout/View Cart
