FocusSport™ 2.0L & 2.3L Duratec Cool-Flo Race™ Air Intake System
This is a true "cold air" intake system that situates the filter in the lower front region of the car, away from ALL engine heat. The Cool-Flo Race system utilizes 3" mandrel bent steel tubing along with laser cut bracketry. Other features include all tig-welded construction and coated with silver powdercoat.
|
FocusSport Race Intake Tube
• Mandrel bent steel construction
• Silver powercoated finish
• Tig-welded |
|
Induction Technology Group air filter
• Three layer reticulated polyester foam element
• Pre-oiled with ITG dust retention coating
• Optimal filtration of particles as small as 10 microns
• LIFETIME WARRANTY |
|
Easy to clean connecting hoses
• High temperature resistant
• Three ply silicone construction
• Oil resistant |
As with our standard Cool-Flo systems, we supply an ITG Maxogen air filter for the best possible flow and filtration. Backed by a LIFETIME warranty.
|
"Don't settle for an air intake system that's FULL OF HOT AIR™"...get the original FocusSport Cool-Flo Air Intake System for your Ford Focus. |
 |
FITMENT NOTICE: |
If your vehicle is equipped with the breather tube shown to the right, indicate such when ordering. This must be indicated prior to ordering to insure proper fitting.
(Mouse over image to view larger) |
 |
Ford Focus 2.0L & 2.3L Duratec
|
FS015 |
$219.95
 |
ITG Dust Retention Coating
(Ground Shipping Only) |
FSITG-DRC |
$19.95
|
Replacement ITG Maxogen Cone Filter for part # FS015
(Please note, the ITG filter comes with a Lifetime warranty to orig. purchaser) |
15JC60/73C |
$89.50
|
FocusSport™ 2.0L Zetec Cool-Flo™ Air Intake System
FocusSport is proud to offer the Cool-Flo air intake system. Don't be fooled by other systems offering no protection from engine heat. This unit comes complete with our heat shield and rubber seal that meets up with the hood to reduce the surrounding air intake temperature by as much as 50% when compared to our competitor's versions. By reducing intake temperatures we are able to take advantage of the cooler (more dense) air resulting in improved throttle response, better combustion, and more power.
Included with the kit is the FocusSport heat shield with rubber seal, and an Induction Technology Group, Ltd. air filter which features cutting edge technology derived from Formula 1, WRC/F2 Rally, and BTCC. Also included are a breather filter,connecting hose, installation hardware, and installation instructions. Factory mounting points are utilized for installation without the need for permanent modification or fabrication.
Ford Focus 8v SPI/16v Zetec/SVT |
FS010 |
$219.95
|
ITG Dust Retention Coating
(Ground Shipping Only) |
FSITG-DRC |
$19.95
|
Replacement ITG Maxogen Cone Filter for part # FS010
(Please note, the ITG filter comes with a Lifetime warranty to orig. purchaser) |
15JC60/78 |
$89.50
|
Replacement ITG Breather Filter for part # FS010
(Please note, the ITG filter comes with a Lifetime warranty to orig. purchaser) |
EBF16 |
$22.95
|
How often should I clean my filter?
Maxogen filters that are exposed without protection in the engine bay, fitted either directly to air flow meters, will need regular inspection every other month to make sure that they are still in well oiled condition. Depending on where they are situated and how much work they have to do will depend on how many times a year you will have to wash and re oil them. We would suggest that due to their close proximity to the engine and the possibility of the oil drying out through the air flow and radiant heat that they are cleaned on a regular 6 monthly basis or more frequently depending on how much use or how dirty they get. 
itg Maxogen Cleaning Instructions
Checkout/View Cart
